Oberton 12CX1
  • Oberton 12CX1
  • Oberton 12CX1

Cere mai multe informatii despre Oberton 12CX1 la numarul de telefon 0766.332.366 sau discuta pe forumul Poweraudio.

Preţ: 1.025,00 Lei
Fără TVA: 861,34 Lei
la comanda - 6 Saptamani
Producător: Oberton
Cod produs: Oberton 12CX1
Puncte de recompensă: 17
-
+
Adaugă in Wishlist Compară produs
0 opinii 0 opinii Spune-ţi opinia
Etichete: Oberton 12CX1 difuzor coaxial profesional coaxial oberton oberton 12 inch difuzor coaxial 12 inch difuzor 12" woofer midhigh fullrange coaxial 12" oberton 12"

Application: Stage monitors and compact bass reflex boxes.

The 12CX1 is a 12" / 1" coaxial transducer designed for use in compact reflex enclosures and stage monitors with a nominal dispersion of 80 degrees. The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 65 mm (2.5 in) LF voice coil has Kapton former, which together with high temperature resistant resin ensure high reliability by high power.

A triple aluminium demodulating rings on the magnet structure reduce distortion and inductance and improve transient response.

The 1" exit compression driver adopted is our D2544 model. The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end.

Because of design with single magnet assembly the speaker has light weight and compact size.
 

 

SPECIFICATIONS

THIELE-SMALL PARAMETERS

Nominal diameter
Impedance
Minimum impedance LF
Frequency range
Dispersion angle

LF unit
Sensitivity (200-1000 Hz)
Power Capacity AES ¹
Program Power ²
Voice Coil Diameter 
Voice Coil Material 
Voice Coil Former
Voice Coil Winding Depth
Magnet Gap Depth
Cone Material 
Basket 
Magnet 
Flux Density

HF unit
Minimum impedance HF
DC resistance
Sensitivity (1000-15000 Hz)
Power capacity (1000-20000 Hz)
Program power
Voice coil diameter
Winding material
Diaphragm material
Flux density

315 mm (12 in)
LF 8 Ohm /HF 16 Ohm
5.86 Ohm
60 - 16000 Hz
80 deg


99 dB
300 W
600 W
65 mm (2.5 in)
Cooper
Kapton
13 mm
9 mm
Paper
Die Cast Aluminium
Ferrite
1.00 T


12.3 Ohms
10.6 Ohms
106 dB
40 W
80 W
44 mm (1.75 in)
Aluminium
sandwich polyester
1.8 T

Resonance Frequency 
Mechanical Efficiency Factor (Qms) 
Electrical Efficiency Factor (Qes) 
Total Q (Qts)
Equivalent Air Volume (Vas )
Diaphragm mass ind. airload (Mms) 
Voice Coil Resistance Re

Effective Diagram Area (Sd) 

Peak Linear Displacement of Diaphragm (Xmax)*
Mechanical Compliance of Suspension (Cms) 
BL Product (BL) 
V.C. Inductance at 1 kHz (Le)

57.58 Hz
4.84
0.40
0.37
68.49 L
41.27 g
5.22 Ohms
514.7 cm2

± 4.25 mm
0.185 mm/N
13.94 T.m
0.737 mH 

MOUNTING INFORMATION

Overall diameter
Depth
Baffle hole diameter
Bolt circle diameter
Number of mounting holes
Net weight

310 mm (12 in)
173 mm
280 mm
294 mm
8 with diam. 7 mm
7.8 kg

 

1.  AES standard. Power is calculated on rated minimum impedance. Measurement is in 65 L box enclosure tuned 63 Hz using a 40-400 Hz band limited pink noise test signal applied continuously for 2 hours.
2.  Program power is defined as 3db greater than AES Power Capacity. 
*  Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.

Descarca fisa tehnica click to download pdf

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!
Rău Bun

Continuare